in this research, feasibility study of integrating thermal desalination unit with gas turbine (gt) has been investigated using retrofit and grass root design techniques  for lavan island oil refinery which is located in persian gulf. according to computed parameters on developed code for the power generation unit no.1 using ees (engineering equation solver) software, thermal efficiency of the g...

Most of the advanced integrated energy systems need a heat recovery steam cycle (HRSC), either fired or unfired, that recovers the waste heat from gas turbines and process units in order to generate electric power and supply mechanical power to compressors, heat to endothermic processes, and steam to external users. The key feature of such HRSCs is the integration between the heat recovery stea...

In this paper, an innovative power plant, constituted by a gas turbine in combined-cycle fuelled by a synthesis gas (or syngas), produced in a local biomass gasifier, is analyzed. The plant is integrated with an external combustion system, fed by cellulosic biomass, connected to a heat exchanger able to increase the air temperature, as in a regenerative cycle. The combustion products pass throu...

The paper presents the results of a theoretical stability analysis on a vertical type natural circulation heat recovery steam generator. The evaporator of the boiler consists of four parallel horizontal tube paths, which are connected at both ends with headers. For different operation pressures and geometries the dynamic instability and in particular the density wave oscillation (DWO) was analy...

The combined cycle power plant is made up of three major systems, the gas turbine engine, the heat recovery steam generator and the steam turbine. Of the major systems the gas turbine engine is a fixed design offered by a manufacturer, and the steam turbine is also a fairly standard design available from a manufacturer, but it may be somewhat customized for the project. In contrast, the heat re...

1. Steam Generation 1.1. General Characteristics 1.2. Circulation in Boiling Water Reactors 1.3. Steam Generation in CANDU Reactors 1.4. Steam Generators 1.5. Steam Generator for PWR and CANDU Systems 1.6. Heat Transfer 2. Steam Generator Operation 2.1. Swelling and Shrinking 2.1.1. Steady State Swelling and Shrinking 2.1.2. Transient Swelling and Shrinking 2.2. Level Control 2.3. Carryover 2.4...

The once-through heat recovery steam generator design is ideally matched to very high temperature and pressure, well into the supercritical range. Moreover this type of boiler is structurally simpler than a conventional one, since no drum is required. A specific mathematical model has been developed. Thermodynamic model has been implemented to suit very high pressure (up to 240 bar), suband sup...